DPS
IBAK has extended its MODULAR system of sewer TV components with the IBAK DPS Leak Testing System. All existing IBAK TV systems can be modularly extended in 3 variations: from section-by-section testing through joint testing to pipe socket testing. The equipment for sewer inspection and leak testing which hitherto formed separate units in the inspection van has now been combined to comprise an integrated system. The common control unit and the common cable winch with 250 m of special cable for the transmission of compressed air, power and inspection data ensure a clear-cut equipment configuration and fast working procedures. And the corresponding analysis and documentation software is naturally also available.
Everything from one source - just typical IBAK!
• One single system for leak testing and sewer TV inspection
• Sections, joints, pipe sockets and manholes with the same system
• Fast working procedures thanks to the new hybrid cable
• Simple handling of all components
• Low sleeve pressures to avoid pipe damage
• Low equipment weight
• Shore hardnesses of 30 Shore A for better sealing behaviour of the test sleeves
• Pipe socket and branch sewer testing up to 40 m (130 feet) into the branch sewer
• Satellite stopper for negotiation of bends of up to 67.5°, with axial camera
• System components of modular design
Leak testing of house drains and house sewers
• Autonomous coiler system
• Bend negotiating capability of up to 67.5°
• 100 / 125 mm (4 / 5 inch), 125 / 150 mm (5 / 6 inch) pipes
• Testing of house drain networks
• Testing with water
• Simple set-up, easy handling
Testing of sewer sections and parts of sections
Leak testing of sewer sections and parts of sections
• Automatic operation possible
• PC-controlled testing
• Sewer section filling capacities of up to 2 m3/min. possible
• Safety shutdown on emergency stop
Joint testing
• Test unit of aluminium
• Wide sealing sleeves
• Multidimensional sealing sleeve
• Testing under TV surveillance
• Fast deflating of sleeves
Pipe socket and house sewer testing from mainline sewers
• No work in manholes required
• House sewers of 100 / 150 / 200 mm (4 / 6 / 8 inch)
diameter
• Maximum length of house sewers 40 m (130 feet)
• Positioning of the sealing stopper under camera
surveillance
• Mainline sewers of 200 - 800 mm (8 - 32 inch) diameter
• Patented rotary lead-through for the push element
System Technical Data
Vehicle
• VW Crafter 50 / MB Sprinter 515
• MB Vario 816 (especially for building site operation)
Power Supply
• Battery: 640 Ah / 230 V, 5 KVA
• Generator: 230 V, 7 KVA (optional)
• Generator: 400 V, 13 KVA (optional)
Compressed air generation
• Compressed air tank: 140 l
• Compressed air tank: 100 l (optional)
• Piston compressor: suction capacity 250 l/min.
• Screw compressor: suction capacity 2 m3/min. (optional)
House drains and house sewers
• Operating range: 100 to 125 mm (4 to 5 inch) pipes,
125 to 150 mm (5 to 6 inch) pipes (optional)
• Test medium: air and water
• Portable on coiler
Leak testing of sewer sections and parts of sections
• Operating range: from 50 mm (2 inch) pipes upwards
• Test medium: air (excess air pressure and vacuum) or water
• Test procedure: fully automatic
• Recording of pressure and temperature data
Joint testing
• Operating range: 150 to 800 mm (6 to 32 inch) pipes
(from 200 mm (8 inch) pipes upwards under camera surveillance)
• Low equipment weight
• Shore hardness of the sealing sleeve: 30 Shore A
• Low sealing pressure
Pipe socket and house sewer testing
• Operation: from the usual control unit
• No entry into the sewer during the test procedure required
• Low equipment weight
• Shore hardness of the sealing sleeve: 30 Shore A
• Test medium: excess air pressure
Download brochure
IBAK DPS System
