Jetting-CCTV-System (System for Laterals)

Jetting-CCTV-System (System for Laterals)

Jetting-CCTV-System (System for Laterals)

Installed in a combined flushing and inspection vehicle, this system provides an optimum basis for the inspection of laterals from mainline sewers.

Thanks to the modular IBAK design, the Lisy 3 module for instance can be combined with the T76 camera tractor to form a satellite system. To flush and inspect in a single operation, a PHOBOS flushing nozzle can be installed on the push rod. Using the IKAS evolution software and a sensor installed in the camera, the pipe run can be measured in the xyz axis with the new 3D-GeoSense system. The measuring accuracy of the z-axis is further enhanced by the hydrostatic level measurement system which can also be optionally connected to a combined flushing and TV vehicle.

With the aid of IKAS evolution, the 3D-sensor measured data (XYZ coordinates) can be captured completely automatically. This is done in a single operation together with the TV inspection. In addition, IKAS evolution permits real-time presentation of the measured pipe run in the form of a network graphic during the TV inspection. Cartographic material (e.g. the floor plan of a building) can be imported into the software and adapted to the required size so that the generated pipe run appears immediately in the plan. The pipe run is saved with three-dimensional coordinates (georeferenced), and is thus exactly defined geographically so that it is always clear where on the earth the pipe run is located. The resulting site plan can be easily exported in all supported sewer data formats.